How to improve the quality of mold slope: First, for the slope of the deformation mode box. In the production process slope mold when the mold deformed dam slope mold, mold temperature may be, when the mold material gentle product dam slope mold temperature higher specification, the dwell time may be inadequate and residual stress of the role - design reasons, or slope mold wall thickness of the product caused by uneven. Second, mold slope fracture problem. It appears in the production mold slope when the fracture, probably because too much material to fill and ram too small and too few, the top speed is too fast, the temperature is not high enough, there is not enough preheated inserts may lead to mold slope break These are to be identified. Third, the slope mold wear. Mold slope when stripping, if a release occurs octave too small difficulties, insufficient vertical fray will have processing residues, bubble temperature control is not good, thin wall thickness disparity is too large, the water ratio control is not good, too much pressure Great Heilongjiang dam slope mold, the exhaust is not smooth all produce slope mold wear causes. High-speed slope mold manufacturers in order to expand its product sales at home, are their own home-speed cement mold an election issue, one of which Shenyang dam slope mold manufacturers, than product quality, high-speed engineering for the quality of the mold is the most valued, manufacturers In the mold of quality above efforts, ensure that their factory production of high-speed slope mold products can be used many times without deformation, stripping difficult phenomenon does not occur, a series of class mold product quality assurance measures, continuous emission, in which the top mold manufacturers also see attitude toward the market share of high aspirations